Grinding the outer circle to the point (5)
Next, all of JUNKER's machines will be equipped with an operator panel Operator-Panel. Its new human-machine interface has a unified operating interface that does not depend on the control system. Through this interface, the operator can control the machine and all the units and auxiliary facilities with repeated safety. Despite this, there is of course a need for improvement in the machine tool, for which Mr. Meyer of JUNKER pointed out: “For example, for the amount of pumping, we have to take the parts out of the machine after machining so that we can do it on the machine. SPC measurement (see picture 6), the reference value can also be measured in the precision inspection room. The workpieces that have just been taken out are wet and oily, which is very uncomfortable for the employees and the workplace It will be soiled by the grinding oil. So the solution may be to have an integrated centrifuge unit in the machine where the shaft is clamped between the two tops and driven for a short time.†These people who love to study in Trach should have no problem. In this way, in the near future, we can see that the yellow and blue machine tools carry their latest optimization solutions in the field of grinding processing. Image 6 Previous page Komatsu Cab Parts,Komatsu Cab Door Parts,Komatsu Cab Genuine Part,Komatsu Excavator Cab Parts JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsugenuineparts.com