How to open the door lock to help you easily get this coup
I believe that each household will have a door lock on the door, but knowing that there are many types of door locks. If you use the oldest son, these locks will be broken. At this time, you must remove it and replace it. Different types The method of demolition is also different. The following Xiao Bian will introduce to you how to open the door lock and these coups to help you easily get. 1. How to open the spherical door lock Look at the handle of the lock in the opposite direction. First you can see that there is a small hole in the small part of the handle. Insert it with hard and thin things (such as nails) to force it. At this time you can pull it. Pull out the ball out of the handle; turn the disc stuck on the door counter-clockwise and you will see two screws. Remove it with the cross-cut knife and pull it out from the outside. The heart can be pulled out by removing two tired wires from the side of the door. 2, how to open the door lock Removal: Unscrew the screws of the fixed cylinder on the panel and remove the cylinder; then, unscrew the two screws on the panel, and then remove the two panels; lock the side of the door. The screws on the screws are also unscrewed. Installation: Cut and install the paper gauge attached to the appropriate height of the door (relax the hole center 1 meter from the ground); this time you will open the door according to the left and right, adjust the slope of the inclined tongue toward the closed door, and then put the lock body into The body hole is fastened with a self-tapping screw; insert the lock body into the slot that was previously opened. At this time, you can use the screw to fix the lock body, insert the square core into the square hole of the lock body, and insert the square hole into the square hole Core, screw in the two fastening screws on the inner panel (temporarily not tightened), insert the lock cylinder through the lock cylinder hole from the inside of the door, use the lock screw to fasten the lock cylinder to the lock body, and then tighten the inner panel. On the two fastening screws; can be corresponding to the corresponding position of the door frame cut out the buckle box hole and the buckle plate support nest, install the buckle box, buckle board, with the self-tapping screws, the tongue should be flexible. 3, how to open the door locks First, you can use a Phillips screwdriver to remove the screw that you see on the top and bottom of the door. Then remove the panel handle. If you only need to replace the lock cylinder, then remove the two screws on the lock casing and take off the lock. Lock the sleeve; then remove the side lock body (that is, the side of the tongue) on the lock cylinder fixing screw, and then pull out the lock cylinder on it. If you come across a very tight lock cylinder, you should use a screwdriver to gently tap the lock cylinder to extract the lock cylinder. Summary: how to unlock the door locks and these few coup to help you easily get the relevant content is introduced to this, the above different lock type replacement method is also a big difference, if you want to replace it, we must follow the above description Control your style to operate. Hair Trimmer,Hair Clippers For Men,Electric Hair Clippers,Hair Cutting Tools Ningbo Alite Lighting Technology Co.,Ltd , https://www.alite-tmwt.com