Main features of insulating glass
Superior energy-saving effect: Modern building energy consumption is mainly air conditioning and lighting. The former accounts for 55% of energy consumption, the latter accounts for 23% of energy consumption, and glass is the thinnest and most heat-transferable material in the exterior wall of buildings. Insulating glass Because the desiccant in the aluminum frame passes through the gap above the aluminum frame to keep the air inside the glass hollow dry for a long time, the temperature insulation performance is excellent. Highly soundproofed: Insulating glass can reduce noise by 27~40 decibels, and 80dB of traffic noise outside is indoors, only 50 decibels. Eliminate frost: The temperature difference between indoor and outdoor is too large, and the single layer of glass will frost. In the case of insulating glass, the inner glass that is in contact with the indoor air is affected by the air barrier, and even if the outer layer contact is low, condensation on the glass surface is not caused by the temperature difference. Insulating glass dew point up to -70 ° C (without strip of insulating glass) The wind pressure resistance is improved: the curtain wall is mainly subjected to wind load, and the wind pressure resistance becomes the main indicator of the curtain wall. The wind-resistant strength of the insulating glass is 15 times that of the single-piece glass. The glass is not easy to self-explosion: the production method of the insulating glass is the bonding method, which is cold processing, the internal stress of the original glass sheet is not changed, and the surrounding is sealed with an elastic material, and the glass is not easy to self-explosion. The coated glass film layer does not fall off: the metal film surface of the coated glass cannot be exposed to the air for a long time, and the metal film surface of the coated insulating glass never falls off in the dry sealed air. The original glass will not burst: in the air-conditioned room, the outside of the summer single glass is exposed to direct sunlight, heat is collected, and there is a temperature difference inside and outside the glass. When the temperature difference is too large, the glass will burst. This phenomenon exists in insulating glass. The scope of application of insulating glass: doors and windows, ceilings, schools that need sound insulation, hospitals, stadiums, televisions, radio recording studios, etc., also used in refrigeration appliances, airplanes, ships, locomotives and other fields. 304 Stainless Steel Shower Set DQOK is a bathroom factory specializing in the production of stainless steel shower sets. We have sundry multi-functional Shower Set. All products have patents, avant-garde design and unique innovation. Dingquan bathroom will be your priority 304 Stainless Steel Shower Set,Brushed Stainless Steel Shower Set,Stainless Shower Set,Steel Shower Set Heshan Dingquan Sanitary Ware Industry Co., Ltd , https://www.dqokfaucets.com