Modern home decoration pay attention to do not leave decoration four regret

Unfortunately one:

The number of outlets is a little less

Some people say that women always have one less piece of clothing, and those who have been decorated will say that my family has less of an outlet. Seeing the fun of people's home aquariums, Mr. Qu also wants to buy one. There are places in the living room where the fish tank can be placed. However, when you look closely, there is no security outlet on the empty wall. The lighting and filtration equipment of the aquarium should be Reliance on the drag line to work, had to give up.

In various decoration network forums, the socket issue is often the focus of the decoration regret, the house is getting bigger and bigger, the electrical appliances are getting more and more, the more outlets are more loaded, but after moving into a new home, it is often found that there are still less. For example, someone bought a hand-held ironing machine and tried to iron the clothes on the balcony and put it in the closet. However, he found that there was no security outlet on the balcony. Every time I use ironing, I use a long drag. Line board. For another example, a row of sockets on the TV background wall is just full of TVs, DVD players, and stereo plugs. However, the district has made digital TV transformations. Suddenly there is an additional set-top box, and you have to ask for help.

Solution: Each wall in the living room, dining room, and bedroom should be fitted with a socket. Even a small space such as a storage room, a cloakroom, etc., must have at least one socket. The wider walls are installed one at a distance. TV wall, desk wall, kitchen console wall, etc. may use a variety of electrical appliances, installation of sockets and more.

Regret two:

Switch installed low point

The switch is usually installed at the door and the headboard. The low point of the high point seems to be a small problem. Usually it is installed at a height of one meter or more. Adults and children can raise their hands, but sometimes there are problems. Ms. Yang bought a two-story elevated bed for her daughter. On the lower floor was a desk. On the upper floor was a bed. When my daughter climbed into bed to sleep, she had to turn off the lights for her mother because the switch was placed on a single-bed basis. Highly designed, her daughter couldn't reach the switch on the upper bunk.

There are many regrets caused by the similar switch socket position. For example, the design of the bedside lamp switch is too low, and the nightstand is selected too high, the switch will be blocked by the bedside cabinet; for example, some people designed the background wall outlet height according to the height of the old TV cabinet, but the purchase The current low-profile TV cabinet causes the outlet to be positioned higher than the TV cabinet, which affects the overall visual effect of the background wall, and even the situation that the height of the counter of the TV cabinet is exactly in the middle position of the outlet panel affects the actual use.

Solution: The height of the switch socket must match the size of the furniture. The best way is to select the furniture before the decoration and tell the designer the size of the furniture. If you did not select furniture in advance, then the location of the switch socket must be taken into account when choosing the furniture after the renovation.

Regret three:

Forgot to advance the wiring

Will you discharge CCTV signal boxes in the kitchen and bathroom? Of course not. Miss Zhou did not do this when she was renovating. Now she regrets it. Seeing the LCD TV prices going all the way down, she wanted to replace the 20-inch LCD TV in the dining room with a 32-inch TV. What about the small TV? Install it in the kitchen. In this way, you can watch TV while cooking. Sometimes you can learn cooking while watching the food show. Unfortunately, there is no closed circuit TV line in the kitchen. Install it in the bathtub of the bathroom, while watching the soap opera while bathing is also good? It is also regrettable that it is even more impossible for a bathroom to have a closed-circuit television outlet. Such beauty can only be imagined.

The development of household appliances is changing with each passing day, which requires that the wiring for home decoration should be advanced. Otherwise, to enjoy the new technology, one must endure the demolition of the newly installed pipeline. For example, projectors, satellite TVs, etc. are more and more popular nowadays, but most families do not reserve dark lines and have to take the open line.

Solution: As the price of copper rises, the prices of cable lines continue to rise. Multi-wiring means more expenses, but considering the cost of re-wiring is even greater, it is not as cost-effective as a proper advance. If you have no idea of ​​how to route it properly, you might as well ask a professional cabling company to fix it.

Regret 4:

The curtains shine a little more

Some people will be able to fall asleep, thunder will not wake up, but some people are particularly concerned about the sleeping environment, noisy voice, light is not enough. If you are the latter kind of person, be sure to pay special attention to the window when decorating. The new home Mr. Shen moved into was facing the east. The morning sun often used the curtains to illuminate the entire bedroom and wake him up later. In desperation, he went to the curtain market to customize the blackout curtains, the light did dim a bit, but the sun still shines through the slits of the curtain rods on the ceiling, and Mr. Shen is still not as comfortable as to sleep late.

Solution: Many people have had the experience of staying in a star hotel. These hotels often use "old-fashioned" curtain boxes, with the shade cloth covering the entire window and wall, can basically block all the light. However, in the current home improvement, curtain rods that are more decorative are used instead of the curtain boxes, and the gap between the curtain rod and the wall becomes a light-transmitting place. So if you're a light sensitive person, or a bit older, use a curtain box. In addition, the wooden shutters have a good shading effect, but the price is high.

TV Console Decoration Socket TV Renovation Window Switch Furniture Home Improvement TV Backgrounds Home Furnishing Wall Decoration Living Room Blinds Shutters Venetian Blinds Kitchen Doors Bathroom Design Toilet Door Size Integral Bathroom Bathroom Door Bathroom Size Bedroom TV Background Wall Bedroom Wardrobe Dining Room Furniture Small Bedroom Cloakroom Size bedroom light

Piston and Rod Seals

Piston Seals and Rod Seals are important seals used in mechanical equipment. Their main function is to prevent liquid and gas leaks and ensure the normal operation of mechanical equipment. Piston seals and rod seals are usually used in hydraulic and Pressure system, such as hydraulic cylinders and Pneumatic cylinder. The quality and performance of these seals directly affect the efficiency and lifespan of mechanical equipment.

The classification of piston seals and rod seals is mainly based on their material and design structure. According to the different materials, they can be divided into rubber seals, polyurethane seals, polytetrafluoroethylene seals, metal seals, etc. According to the different design structures, they can be divided into unidirectional seals, bidirectional seals, rotary seals, etc.

Rubber seals are a common type of seal, and their main material is rubber. Rubber seals have good sealing performance and wear resistance, and are suitable for medium and low pressure hydraulic systems and Pressure system. Polyurethane sealing element is a high-performance sealing element, and its main material is polyurethane. Polyurethane seals have high wear resistance, high temperature performance and high pressure performance, and are suitable for high-pressure hydraulic systems and Pressure system. PTFE sealing element is a corrosion-resistant sealing element, and its main material is PTFE. PTFE seals have excellent corrosion resistance and high temperature resistance, making them suitable for fields such as chemical and food processing. Metal seals are a type of high-temperature and high-pressure seal, mainly made of metal. Metal seals have high temperature and high pressure performance and corrosion resistance, and are suitable for high temperature and high pressure hydraulic systems and Pressure system.

Unidirectional seals and bidirectional seals are classified based on different sealing directions. A unidirectional seal can only prevent the leakage of liquid or gas from one direction, while a bidirectional seal can prevent the leakage of liquid or gas from both directions. Rotating seal is a type of seal that can rotate and is mainly used for sealing rotating shafts. Rotary seals are divided into unidirectional rotary seals and bidirectional rotary seals.

Universal Piston and Rod Seals,Interchangeable Piston and Rod Seals,Versatile Piston and Rod Seals

DG Zhongxingshun Sealing Products Factory , https://www.zxs-seal.com