Only three tricks to identify the authenticity of the overall wardrobe
 The whole wardrobe is an indispensable and important part of modern home decoration. Due to the characteristics of environmental protection, fashion, and professionalism, the overall wardrobe can be tailor-made, and it has become a hot spot for family wardrobes. The overall wardrobe can be designed according to your needs. After it is installed in the home, it forms the feeling that the wardrobe is recessed into the wall. Not only can it be cut into a clothes hanging space and a storage space, but the top space can also be used for futons or children ’s toys . Then through the choice of the color of the sliding door of the wardrobe, it can be integrated with the decoration of the entire room. If your bedroom is large enough, you can also design a walk-in cloakroom with a whole wardrobe, and set a stylish sliding door outside, and a private space is finished. There are many brands of overall wardrobes on the market. They are similar in appearance, style and cabinet structure. Then, among the many overall wardrobes, how to choose a suitable wardrobe has become the most concerned issue for buyers. Many small factories and unscrupulous merchants use inferior and non-environmentally friendly plates and hardware to sell as the brands of regular manufacturers and make huge profits. As a result, everyone expressed doubts about the entire industry. In fact, the plates produced by regular manufacturers are very environmentally friendly, and manufacturers of well-known brands can meet the European E1 environmental standards. There are a few ways to quickly identify the authenticity: A look at the packaging In this way, you can know if the merchant has dropped the package. After seeing the goods, the original packaging paper has the brand logo and order number on it. Through the logistics bill and packaging paper can distinguish whether it is OEM processing. (These need to be indicated in the contract when signing the contract at a later stage, it has been prevented that the merchant does not recognize the account) Second look at hardware This is the easiest place for OEMs to do fakes, often using some inferior hardware to impersonate the original hardware or well-known brand hardware. Regular manufacturers do very fine for the anti-counterfeiting of hardware, as small as a connecting piece, as large as the drawer rail all have the same anti-counterfeiting mark as the cabinet, so check the small hardware can quickly distinguish whether it is regular Manufacturer production. Three look at the model Usually the model is edge-sealed on three sides, leaving one side for customers to check the quality of the substrate. First, scrape with your fingernails to see if you can scrape out the powder. If you can, you ca n’t buy it, no matter how cheap the price is, because such a plate will be seriously deformed or even broken after encountering a humid environment. If the powder cannot be scraped, go to the next inspection procedure and smell it with your nose to see if there is an irritating smell (smelly sock smell). If there is, it means that the formaldehyde content is excessive, which is very harmful to the human body. buy. If not, take a look at the veneer (that is, the bright side of the board) and touch it by hand to see if it is very smooth and whether the lines are neat and clear. Usually high-quality panel surface gloss is higher. It feels good and the lines are clear. Regular manufacturers usually have anti-counterfeit marks printed on them, which can be seen with eyes. Here is to explain the material of the veneer. The most used veneer on the market is the veneer sticker. This veneer has relatively stable physical and chemical properties, has the advantages of moisture resistance, acid and alkali resistance, and is not easily deformed. In addition, the veneer decorative panel No post-painting and other finishing treatments are needed, which also reduces the possibility of surface cracking. If the environmentally friendly melamine board is used as the base material, the volatilization of harmful gases can be reduced. Finally, look at the edge banding. The quality of the edge banding is related to the quality and effect of the overall wardrobe. Most of the plates produced by regular manufacturers use imported edge banding machines, and the quality of the edge banding is very high. The interface between the two pieces can not be seen without a closer look. It is difficult to separate it with the knife because of the great integration with the plate. There are anti-counterfeiting marks of the regular manufacturers on the edge banding (the same as those on the panel), but the above points can not be done by OEM. (Editor: Peter)
Shower Hoses,shower hose with head,80cm shower hose,shower heads with hose,Handheld Shower Hose,shower hose 1m Yuyao Gaobao Sanitary Ware Factory , https://www.gurberry.com