Paint lecture hall: six enamels painted with wood paint
The correct coating construction method can make the paint play professional performance. In terms of wood lacquer, if you want to get good results, you must pay attention to the construction method. Here are the six tips for wood lacquer construction. Six enamels painted with wood paint Wood lacquer construction è¯€çª one: pre-dusting. First of all, the surface of the wood should be polished and smoothed, and the floating ash should be treated. When cleaning, a special dust-removing cloth can be used, and a large area (such as a ground plate) can be repeatedly vacuumed by a vacuum cleaner. Wood lacquer construction è¯€çª 2: varies from material to material. Understand the wood of wood, if it is hard wood (such as teak, eucalyptus, Bengals) should be used with caution putty, foaming water, etc. to avoid discoloration and affect adhesion. For hard wood, if you want to get the best effect, you can paint directly. If you need to fill the gap, it is recommended to mix it with paint and fine wood powder. If it is general wood, if you need to use transparent putty as the substrate, you should use it first. The scraper is evenly applied to the entire base layer. It should be thin and not thick. After drying, the grinding should be uniform and the excess transparent putty attached to the surface of the wood should be thoroughly polished to avoid lacquering. Wood lacquer construction è¯€çª three: preparation. The environment and painting tools must be cleaned when painting, and the operator should wear clean overalls and a clean work cap. Wood lacquer construction è¯€çª four: coating grasp. The paint should be thin and not thick, and can be carried out in a thin layer. When doing multi-layer coating construction, each application should be applied after the lower layer is dry and polished. Wood lacquer construction è¯€çª five: moderate temperature construction. When the temperature drops below 5 °C, the drying time will be prolonged. At the same time, if the temperature is too low, white fog or matting will occur. Therefore, it should be avoided in this case. Avoid direct sunlight or high temperature operation. If the temperature is too high, the paint will dry quickly. Pinholes or air bubbles are also generated, so high temperature construction should also be avoided as much as possible. Wood lacquer construction è¯€çª six: humidity control. When the ambient humidity is greater than 85%, it is not suitable for construction, otherwise it will easily cause whitening and other defects.
China CNC Beam Drilling Machine Suppliers CBD Series
Our CBD machines are used for the drilling processing of H-shape steel, box beam and channel steel of steel structure, bridge, three dimensional garage and petrol platform.
Product feature:
1. Normal machine for drilling beams' web and flange simultaneously
2. Mainly composed of foundation, upper stand, CNC slideway, drilling head, clamp feeding device, electrical system, hydraulic system, cooling system etc.
3. Malformation examination for webs and flanges.Horizontal and vertical clamping for H-beams.
4. As for left and right spindles, one of them is fixed and the other can do horizontal movement so as to drill the workpiece of different size.
5. The high-quality atomizing cooling system is of high quality that ensures the cooling and lubricating when drilling so that it can prolong the drill`s life.
6. Main components in control system are all world famous brands with high quality which ensures the reliability of machine. Programming, storing, display, selection and communication are convenient by using host computer.
7. Clamping workpiece, drills feeding, are mainly driven by hydraulic system. Main components in hydraulic system are all world famous brands with high quality that ensures the reliability of the machine.
Beam Drilling Machine,Beam Drill Lines ,Cnc Beam Drill Line,cnc beam drilling machine Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com