Spatial characteristics and formation mechanism of urbanization in China's counties

New urbanization, industrialization, and agricultural modernization are the engine of coordinating urban and rural development. Urbanization is the leading driving force for the transformation of urban and rural development, and it increasingly highlights its leading role in coordinating urban-rural relations. Urbanization research has always been a hot topic in the field of geography, especially the mode selection of urbanization development is the core issue of academic research and debate. It not only focuses on the development of small towns and big cities, but also advocates diversified urbanization. . In recent years, we have focused on the level of urbanization development at the national or provincial level, the urbanization regional pattern, the relationship between urbanization and economic development, the resource and environmental basis of urbanization, the dynamic stage of urbanization, urbanization and rural hollowing. The research has made new progress, and some scholars have focused on the typical case studies of urbanization development mechanisms and models. From the perspective of the urbanization process of the countries in the world, the general countries have experienced the transformation process of urban-rural differentiation, isolation, opposition to urban-rural integration, and integrated development. Among them, the urbanization rate in the urban-rural integration stage is generally 50%~70%, and the industrialization rate is transforming in urban and rural development. It is a comprehensive humanistic process of the factor transfer, strategic transformation and mechanism transformation of the urban-rural relationship regional system. In 2011, China's urbanization rate exceeded 50%, and urban-rural relations have entered an important stage of urban-rural integration and even integrated development. Since the Fifth Plenary Session of the 16th Central Committee of the Communist Party of China put forward the strategy of "building a new socialist countryside", urbanization and new rural construction have become "two-wheel drive" for China's urban and rural development. The development of county economy, the urbanization of migrant workers and the development of small and medium-sized cities have also become an important part of the national economic development strategy. Adapting to the urban-rural development transformation and healthy urbanization strategy transformation fund project: National Natural Science Foundation of China (41130748); National Natural Science Fund Youth Science Fund Project (41101162); Chinese Academy of Sciences Knowledge Innovation Project (KZCX2-EW-304) Member of China Geography Society (S110005331M). Mainly engaged in land use and agricultural and rural development research. He has published more than 200 papers and published the development of county-level urbanization, which has become a frontier field of academic research. At present, the systematic research on the development trend, spatial pattern and formation mechanism of county urbanization is still insufficient. This paper focuses on the quantitative analysis of the spatial and temporal characteristics of urbanization in China and its formation mechanism, in order to deepen the theoretical research of rural geography, science. Establish a development strategy for county urbanization and provide a basis for improving the regional model of urbanization.

2 Data Sources and Research Methods 2.1 Data Sources This paper analyzes the urbanization of China's counties since 1990 using the population and non-agricultural population data provided by the county population statistics (1991, 2001, 2009). Spatial characteristics and their formation mechanism. Among them, the total population refers to the permanent population data of counties in 1990, 2000 and 2008; the non-agricultural population refers to the population engaged in the second and third industries and the part of the population they support. The urbanization rate statistics after 2000 adopted the resident population statistics method, and the statistical results included a large number of floating population who did not really realize the settlement in the city. This paper takes non-agricultural population as the main data source for urbanization rate calculation, aiming to reveal the level of urbanization and its difference pattern in China's county from the perspective of farmers realizing the settlement and living in the city. The socio-economic data of each period mainly comes from the China Regional Economic Statistical Yearbook, the China County (City) Social and Economic Statistics Yearbook, and the statistical yearbooks of various provinces and cities. Vector graphics, DEM data from the National Geographic Information Center.

2.2 Research methods This paper mainly uses the research methods such as coefficient of variation, geostatistics, sample strips and geographic detectors. Among them, the coefficient of variation of the urbanization rate and the annual rate of change of urbanization rate in each period is used to describe the regional difference; the geostatistical research method is used for the spatial distribution analysis of urbanization level, and the urbanization of each typical sample zone is obtained. Distribution trend; using the sample method, focusing on determining the distribution characteristics of urbanization and its dominant influencing factors in representative regions; geo-detectors are used to extract the dominant influencing factors, and quantitatively evaluate each influencing factors.

The coefficient of variation is used to measure the degree of urbanization in the county, and the spatial and temporal dynamics of urbanization development in the county are described. This coefficient has been widely used in the study of spatial differences in geographic data. The calculation formula is as follows: Transect is a linear research area with a regular change in the gradient along a dominant driving factor or a linear regional type with distinct differences. Driven by the international IGBP research program, the sample band research method has been successfully applied in global change research. In order to better reveal the internal mechanism of urbanization development in China's counties, this paper selects three counties along the Yangtze River, along the Bohai New Railway, along the northern border, along the 106 National Highway, and within 100km of the eastern coast. Two north-south transects, the sample band analysis can help reveal the spatial differences in the urbanization level of China's counties and the regional differences in their formation mechanisms.

Geostatistical trend analysis method The urbanization regional difference simulation analysis is an important part of GIS geostatistical analysis. Using GIS as a platform, through the perspective analysis of the orthogonal projection of the urbanization rate of the sample zone, it is helpful for the deep people to reveal the differentiation law of the urbanized sample zone. Each vertical bar in the trend analysis graph represents the value (height) and position of a data point. These points are projected onto an east-west, north-south orthogonal plane, and a best-fit line is drawn from the projected points to simulate trends in a particular direction. See the specific mathematical model of geostatistical trend analysis.

High Speed Door Accessories

About high speed Door Accessories:

1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box

2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light

For some main accessories, here is detain introduction:

1).24G radar sensor:

Brand: Hofic

Technology: Microwave processor

Maintain time: 0.5s

Protection: IP54

Transmitting frequency: 24.125GHz

Maximum installation height: <5meter

Transmitting power density: <5mw/cm2

Power consumption: <1W(VA)

Installation angle: 0-90°(lengthways) -30-30°(crosswise)

Supply voltage: AC&DC 12V-30V

2).Photocell:

Approval CE & ISO9001

Power supply AC/DC 12-30V

Static current 25A

Action current 40mA

Mounting distance Max 10m

NO or NC contact Done by NO./NC. contact selection

Working environment temperature -42℃ to +45℃

Working environment humidity 10 to 90%RH

Appearance dimensions( controller) 123*50*32mm(L*W*H)

Appearance dimensions(Magic eye head) 19*13mm(L*D)

3). Remote control

Operating Voltage: AC220V/50HZ+-20%

Transmit power:≤100mW;Super regenerative module, strong anti-interference

Operating temperature:-30℃-+70℃

Working frequency: 433MHZ;transmitter 1527, millions of encoding chip

Accept sensitivity:≤110dB

Manipulation method: electric remote control

Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip

Configure the function: Up, down, stop, anti-lock full-featured reproduction

4). Magnetic loop

Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V

Power: <2VA

Continued electrical output: 7A / 250V AC

Frequency range: 20 to 200K Hz

Response time: infinity (factory setting) or adjust maintain time

Sensitivity: 0.01% to 0.1% divided into 3 levels

Protection level: IP30

Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2

Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH

Operating temperature: -25 ℃ to 70 ℃

Storage temperature: -40 ℃ to 85 ℃

Relative humidity: <90% non-condensing

Temperature compensation: automatic compensation up to 50 ℃ / h

Connection type: 11 pin DIN rail socket

Dimensions: 41 * 78 * 85 mm (width * height * length)

Weight: 250 grams

5). manual push button

This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.

Door Exit Button Push To Exit Switch Door Opener For Access Control Security

Main Feature

Fashionable appearance

Made of ABS Plastic

Easy to install and operate

Used for access control

Specification

Mechanical Life: 500,000 test

Material: Plastic

6). Limit switch encoder

Voltage: DC5V-24V

Output voltage: high voltage≥85%Vcc, low voltage≤0.5V

Maximum mechanical speed:6000rpm

Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.

Current consumption:≤30mA

Response frequency: 0-100KHZ

Protection: waterproof,oil proof,dust prevention, IP54

The output code system: binary code

Operating life: MTBF≥30000(+25℃,2000rpm)

Rotational inertia:4.0x10-8kgm²

Maximum load:radial direction20N

Axial direction:10N

Weight: about 0.4kg

High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.pvchighspeeddoor.com