The home improvement process should monitor and reduce the loss of the paving tile floor
Paving tile flooring, if the loss is large, the loss of owners is not small. Many homeowners are worried that tiles and floors will be worn out too much, but which ones are normal losses and which ones are malicious losses. What should you watch out for in the tile and floor paving process? The owner must first understand that the loss is inevitable in the construction process, in order to reduce the abnormal losses from the entire process link. Accept normal loss In the process of laying tiles and floors, the loss is inevitable. Huang Xiangling explained that since the size of the room does not necessarily match the size of the tiles, the tiles need to be cut off, and the tiles that have been cut off will be lost if they cannot be reused. According to reports, generally speaking, the overall loss rate of ceramic tiles is between 5% and 10%. "The owner first of all has to accept the concept of normal loss objectively, because this is the inevitable construction." The normal wear and tear is caused by the following reasons: The size of the space in the house does not match the size of the tiles. Huang Xiangling, for example, said that if the house is 3.65 meters wide, then 600 x 600 mm tiles are just right, but if it is a 4 meter wide house, the remaining 20 centimeters of tiles will have to be cut off and cause losses. In addition, the larger the size of the selected tiles, the greater the loss. If it is a 800 × 800 mm, 1200 × 1200 mm tile, the ceramic tile that has been cut off will be more depleted, and the loss is far more than 10%. In accordance with the standards of national ceramic tile factory, there will be differences in color, thickness, thickness, and squareness in the country's ceramic tile factory. Even a batch of qualified tiles will have unqualified products. The tiles purchased by the owners have more or less Some unqualified products. In the construction, cutting the tiles will also have a work difference, that is, the presence of normal mistakes. According to reason, the loss of two tiles in 100 tiles is a normal range. These losses are normal. Related to this, Wang Qingqiang said that the normal loss of the floor is 5%, and its loss is also related to many factors, such as the shape of the house. If there are many corners and arcs in the house, the loss is relatively large; the smaller the room, the greater the loss; if the house Very square or the size of the house matches the size of the floor, the loss is relatively small; in addition, the technical proficiency of the workers will also have a certain impact on the loss, skilled workers will probably measure the house and calculate how to shop for it. Pay attention to abnormal wear and tear Unusual losses also exist in the actual process. According to experts, the abnormal loss of tiles is mainly caused by improper purchase and construction. It is understood that if the quality of the tiles is poor, the possibility of damage during construction will be large, and the loss will be large. However, if the customer cannot accept that the tile color difference is too large, the worker will take the tile with large color difference, out of squareness, and chapped skin when pre-paving. Out of the product, if it is a product that can't be returned at a low price, "this loss is very alarming." In construction operations, such as paving, accidentally breaking the tile, even if the worker is unfamiliar, if 100 The number of broken pieces in a block tile exceeds 2 pieces, which are considered to be malicious losses. There is also an abnormal loss in the floor. Some workers intentionally waste floorboards, and some workers use the technology to make improper losses. Full monitoring reduces losses Experts suggest that to reduce the loss of tiles and floors must be grasped from the entire process link. In terms of tiles, consumers are advised to purchase qualified products and agree on replacement conditions with the merchant, such as whether they can make up for, return, replace, claim conditions and responsibilities, etc. Once problems arise, they also know how to handle them; Should also be considered, ordinary 10-30 square meters of the room, the general shop 600 × 600 mm tile on the line, do not choose too large tiles, or greater loss. In order to avoid the loss of tiles, you have to supervise the work. “Once workers are found throwing ceramic tiles and throwing them away, they must ask clearly to prevent workers from arbitrarily wasting.†As for the floor, the owner must first measure the room area accurately before buying the floor, and know how many floors to buy. If the room area is 20.5 square meters, then there must be 5% more room. When buying a floor, you need to buy a floor that is slightly larger than 20.5×(1+5%)=21.525 square meters. If the floor area is overrun, you have to Ask why there is so much loss. If the owner is worried about the manufacturer's counterfeit on the floor or "short of two shortfalls," he can pay attention to inspections when ordering goods. If there are a large number of packages purchased, how many pieces of floorboards per package are worth noting, you can also measure each piece. Floor area, length and width are standard sizes. The owner can also supervise the work. When the paving worker saw the floor, he asked clearly why he saw it. Where is it used? If it is a normal cut, the workers must be able to explain clearly; it can also prevent the paving workers from badly sawing the floor; in addition, consumers can count floors, figure out how many blocks they have bought, how many blocks they have, and how much scrap they have. Attrition rate. Construction Acceptance Flooring Tiles House Room Space Home Improvement Flooring Tiles Flooring Tiles ld Tiles Plastic Handle,Putty Knife Drawing,Drywall Putty Knife,Putty Knife Edge Laizhou Chenke trading Co., Ltd. , https://www.ckbrushes.com
Del flooring    Forest Star    Delaya sliding door Â