The magnitude of the mechanical shaft vibration is divided into four levels.
Second Punch,Second Punch Screw Header ,Second Punch For Screw,Phillips Screw Punch Chongqing Henghui Precision Mold Co., Ltd , https://www.citool.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>The magnitude of the mechanical shaft vibration is divided into four levels. The magnitude of the mechanical shaft vibration is divided into four levels.
In the diagnosis of equipment; oscillating measurement is one of the commonly used methods; generally, the measured vibration level is in a certain scale in the specification to judge the operation of the equipment. The current comparison of prestige diagnosis is measured by the world standardization arrangement ( ISO); the relevant specification for shaft vibration is ISO7919-3; the relevant specification for shell vibration is ISO10816-3; the national standard of China is also formulated with reference to the specification. In the ISO7919-3 specification; The magnitude is divided into four levels; the following is converted according to the speed: /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Speed ​​r/min A/B area gap μm B/C area gap μm C/D area gap μm
Factory inspection limit alarm limit stop limit 3000 88 165 241
1500 124 232 341
1000 152 285 417
Clarify:
Area A: Newly delivered machines generally fall into this area.
Zone B: Machines that oscillate in this zone are generally considered to be tolerable; they can operate for long periods of time without restriction.
Zone C: Oscillation The long-term operation of the machine in this area is generally considered to be unsuitable. Generally speaking, the machine can operate under this condition for a period of time until there is a suitable repair opportunity.
Area D: Oscillation at this scale generally assumes that the condition is serious enough to cause damage.
Recommend to friends comments close window Bearing related knowledge Mistakes in detecting good quality when purchasing bearings
NTN bearing timing protection and routine inspections. Discussion on the layout of extended lifespan. Several typical dynamic pressure bearing layouts and the use of thrust bearings for grinding and device methods.
Static seals and seals for SKF bearings
This article links to http://
Please indicate China Bearing Network http://
Previous:Layout of slewing bearings Next: NSK bearing noise treatment