There are different sound problems with solid wood flooring
Nature Flooring Del Floor Room Home Furnishing Pulse Ranging Sensor is to shoot a beam or a short sequence of pulsed laser beam to the target when working, the photoelectric element receives the laser beam reflected by the target, the timer determines the time of the laser beam from transmission to reception, and calculates the distance from the observer to the target. Pulse Distance Sensor,Laser Range Finder Module,Laser Rangefinder Module,Long Range Laser Distance Sensor,Laser Range Sensor OEM Module CHENGDU MESKERNEL INTEGRATED TECHNOLOGY CO.,LTD , https://www.meskernel.com
539) {this.resized=true; this.width=539;}" border=0>
There are few ways to deal with floor noise. Even if the problem is alleviated after treatment, it cannot be completely cured.
There is a way to completely eradicate the ground, re-tighten the dragons, and re-install the floor. It is really a waste of time and effort. No one wants to counterattack and reload. The floor will not sound until you focus on the following processes and methods before installing the ground dragon and the floor:
1, before the installation of earthworms are generally used 12mm drill hammer drill hole, then wooden box at least 18-20mm above the square wood Morinda is only useful, can not easily hit the hole to go, a few days a wooden shit a dry shrinkage Just
2. The material of the rammedger is harder than that of the earthworm and the hard shrinkage of the wood is small. The worm does not easily pull up the rammer and maintain its stability;
3. Some rooms have a floor level difference of several centimeters. At this time, the master carpenter will put some knife-shaped corks or plywoods under the ground dragon to ensure the level of the ground dragon. Don't forget to raise the floor height by 2.5. Above the centimeter between the earth dragons, short dragons must be fixed with each other to prevent the earth dragons from swinging around to ensure that the earth dragons are firm and firm;
4, when installing solid wood floor drilling, the aperture must be smaller than the floor nails, so that the floor before eating nails;
5, the wall is set aside more than 1 cm above the floor contraction joints, in order to avoid climate change or floor moisture content does not match the expansion of the arch, which most people know. The above techniques seem to be small in detail, and the problem is often in small details that people do not pay attention to. In fact, these nodal skills are an important factor in ensuring the quality of the flooring, and they are also an experience point of reference for the relevant personnel and the users to be installed.