Toilet Knowledge Introduction Series Construction
Cement glass decoration 1, according to the structure of the toilet: toilet can be divided into separate toilets and one-piece toilet two, in the choice of separate toilet or one-piece toilet, mainly to see the size of the bathroom space. In general, split toilets take up more space, and one-piece toilets take up less space. In addition, the separate toilet shape should look more traditional, the price is relatively cheap, Siamese toilet should look new and upscale, the price is relatively high. Consumers can decide according to their own circumstances. 2, press the bathroom... 1. What to do before painting? Preparations Before painting, the walls must be pre-treated. The treatment of old and new walls is also different. New cement walls generally should not be painted immediately. If construction is urgently needed, the surface of the cement can be washed with 15 to 20% zinc sulfate or zinc oxide solution several times. After drying, the precipitated silt floating particles are removed and washed with clean water. Dry thoroughly before painting. Rinse well with water. It's best to scrape it with interior wall putty. Note: New Cement... Basic requirements and acceptance: The appearance of sanitary ware should be clean and free from damage. Sanitary ware installation must be firm and must not be loosened; the drainage is unblocked; the joints should be sealed without leakage; the valves are flexible. Acceptance by visual and feel methods. After the installation is completed, no less than 2h water test no leakage, water volume are as follows: Toilet height tank should be Sheng to the hand hole below 10mm; All kinds of wash basins, washbasin should overflow to the overflow; bathtub should Sheng Sheng to not Less than cylinder... After experiencing numerous complicated noises, the bathroom is no longer rigidly adhered to its original functions. Instead, it is a net for women to relax and appreciate life. Body care is more important than cleanliness. When you step into the bathroom and let your face be close to the water, one of the most thorough and refreshing comes to life; when the clear water collides with the beautiful notes of the skin, we look for everything we can enjoy in the sights the way. Bathroom design in 2005 in the main theme of the promotion of women with the same ... 1. Gypsum plasterboard 1) Construction method Paper plasterboard is the most basic intermediate material in the ceiling project. It must be surface-decorated before it can be used. Therefore, the use of gypsum board is the same as the use of wood panels. It can be sawed and planed. , nails and other processing technology, made of a variety of decorative products structure, and then through the surface decoration latex paint, wallpaper, ceramic (to use waterproof gypsum board) for decoration, to complete the decoration project. 2) Analysis of common problems Phenomenon 1: Paper gypsum board... Dzb Electric Hydraulic Pump,Electric Oil Pump For Hydraulic Jack,Hydraulic Oil Pump,Hydraulic Electric Pump Taizhou Juhuan Lifting Protection Equipment Co., Ltd , https://www.jsjoba.com
2 Determine the center of the sewage pipe and mark the cross center line.
3 Turn the toilet upside down, determine the center of the toilet flush outlet, and draw a cross centerline. The centerline should extend to the feet around the bottom of the toilet.
4 Determine the installation position of the bottom foot screw of the toilet, use the impact drill to drill the mounting hole, and embed the plastic sleeve of the expansion screw.
5 Install a special sealing ring on the sewage outlet of the toilet, or put a circle of glass glue (putty) or cement mortar around the drainage pipe. The ratio of cement to sand is 1:3.
6 Align the reticle on the toilet with the sloping line of the floor drain, install the toilet, and press the sealing ring firmly. Then install the foot screw and decorative cap, and then place a mark around the bottom of the toilet. Ring glass glue (putty) or cement mortar, cement and sand ratio of 1:3, toilet installation to maintain the level before and after.
7 Install or commission the tank accessories. First check the water pipe, discharge the water for 3-5 minutes to flush the pipe to ensure the cleanness of the water pipe; install the angle valve and connecting hose, then connect the hose to the inlet valve of the installed tank fitting and press the water source to check the water supply. Whether the valve inlet and seal are normal, check whether the installation position of the drainage valve is flexible and whether there is any jamming or leakage, and check whether there is any leakage inlet valve filter device.
8 If any abnormality is found during the commissioning process, refer to “Common Troubles and Treatments for Toilets and Water Tank Fittingsâ€.
9 Install the toilet lid.
10 After the toilet is installed, it must be waited until the glass glue (putty) or cement mortar is solidified before the water is used. The curing time is generally 24 hours.
2, toilet installation and use precautions:
(1) When installing the toilet, do not pour cement mortar into the cavity or other cavity before the toilet to avoid cracking the feet of the toilet due to condensation.
(2) When using the toilet, do not pour in easily-blocking items such as newsprint, paper diapers, and sanitary napkins into the toilet.
(3) Toilet bowls cannot be used in sub-zero water environments. Otherwise, water ice expansion will break the ceramic body.
(4) To prevent breakage and water leakage, do not hit the ceramic with a hard object.
(5) In order to keep the product surface clean, please use nylon brush and soapy water or neutral detergent to clean it. Never clean it with steel brush and strong organic solution, so as not to damage the glaze of the product and erode the pipeline.
3, tank accessories troubleshooting methods:
Failure inspection and treatment
1, the inlet valve does not enter the water (1), check whether the tap water pressure is too low.
(2) Check whether the inlet valve filter is blocked by debris.
(3) Open the inlet valve cover and check whether the sealing ring in the inlet valve is detached or there are debris such as hemp, iron filings and sediment.
(4) Check whether the inlet valve float body is stuck with the tank wall and whether the float body can be freely up and down.
2. The water tank has been filled with water but the inlet valve continues to fill the water (1). Check if the tap water pressure is too low (below 0.05Mpα) or too high (0.8Mpα).
(2) Check whether the float of the inlet valve is freely up and down and whether it is stuck by the tank wall or other components.
(3) Open the inlet valve and check whether the sealing rubber inside the valve body is stuck or dislodged by debris.
(4) Check if the inlet valve is broken.
3, press the drain valve button or wrench, but the drain valve does not drain check the drain valve chain is off or too long
4. Press the drain valve button or wrench. Although the drain valve drains, stop draining after loosening (1). Check if the drain valve chain is adjusted too short or too long.
(2) Whether the delay cup leak hole is too long.
5. There is always a small amount of water leakage in toilets (1). Check whether the installation hole of toilet water tank drain valve is deformed or cracked.
(2) Check whether the mounting surface of the installation hole of the toilet water tank drain valve is uneven.
(3) Check whether the drainage valve is installed when it is installed.
(4) Inspect the sealing surface of the drain valve sealing film for impurities or other irregularities.
(5) Check whether the drainage valve sealing film is deformed or loosened.
(6) Check whether the drain valve outlet body is bruised.
(7) Whether the water level is adjusted too high and overflows the overflow pipe.
(8) Check if the drain valve chain is too short.
4, common toilet flush function check processing method:
(1) After checking the installation of the water tank fitting, whether the water level adjustment is in place or not, and whether the water seal has been fully replenished.
(2) Inspect the inside of the toilet or the sewage outlet for foreign matter.
(3) Whether the sewage outlet of the toilet has been handled by itself (holes open large).
(4) When checking the installation of the toilet, whether the sewage outlet of the toilet is aligned with the pipeline, and whether the local sewage outlet and the pipeline outlet are partially blocked with cement mortar.
(5) Whether or not there is a reservoir bay on the sewage pipeline.
(6) Check whether the sewage pipeline is in communication with the atmosphere and whether the top of the sewage riser is blocked.
(7) Whether the installation surface of the toilet is uneven or inclined.
(8) Check whether the waterwork is working properly and whether the water quantity meets the requirements. 
Previous
Bathtub knowledge entry series classification articles Next
How to choose electric heating? 
submit