Comparison of the advantages and disadvantages of common wood raw materials for solid wood flooring
Flooring Natural Flooring Floor Paint CS20A Household Electric Screwdriver Set SUZHOU CREATION SPACE INTELLIGENT TECHNOLOGY CO.,LTD , https://www.pkanglegrinder.com
Lanbao Disi Sofa Comfort Flooring
1, Maple: Material weight is moderate, fine structure, smooth cutting surface. The advantage is that it is easy to process and the paint adhesion is better. The disadvantage is warping when dry.
2, black walnut: a precious wood, beautiful and elegant wood, black and purple, elegant and noble. Due to the heavy hue, it is required that the paint must have high transparency after film formation. The wood grain is relatively deep, and the transparent primer is required to have good filling property and strong sealing property. There are stains on the panel during processing or fades in the plywood, which tend to fade over time.
3, rosewood: Material is hard, heavy, clear texture, but the color is light, moderate structure, cutting surface smooth. The advantages are corrosion resistance, good painting and gluing. The disadvantage is that it is not easy to dry.
4, birch: material is slightly hard, fine structure, strength. The advantage lies in processability and good paint adhesion.
5, beech: hard material, straight texture, fine structure, wear-resistant and shiny. The advantage is that it is not easy to be deformed when it is dried, and its processing and painting are better.
6, Liu Liu: material is slightly hard, beautiful patterns, rough structure. The advantages are easy processing, high toughness, and good paint adhesion.
7, pine: red pine. Lightweight and soft material, moderate strength, good drying, water resistance, corrosion resistance. The advantages lie in processing, painting, and coloring. White pine. The material is light and soft, flexible, fine and uniform structure, good drying, water resistance, corrosion resistance. The advantages lie in processing, painting, and coloring. Compared with Korean pine, white pine has high strength.
8. Alder: The material has a beautiful pattern and a thick structure. The advantages are good processability and good paint adhesion. The disadvantages are poor drying and easy cracking.
9. Alder: The material is slightly lighter and softer, and the structure is slightly finer. The advantage is that it is not easy to crack, and the processing, painting and coloring are good.
10. Alder: hard material, rough structure and high strength. The advantages are good coloring, good finish, and easy drying. The disadvantages are processing difficulties, poor glueability, and easy cracking.
11. Alder: The material is of moderate weight, fine structure and aroma. The advantage is that it is not easy to be deformed when it is dried, and its processing and painting are better.
Links: Thousands of dollars in the province just 10 minutes super practical floor selection Raiders waiting for you to see
Cork flooring as the preferred expert for health floor solutions
12, willow: moderate material, slightly thick structure. The advantage lies in easy processing, good bonding and finishing performance. The disadvantages are slight cracking and warping when dry.