First install the door or first floor?

Many people in the home improvement do not understand the order of various renovation procedures, such as first install the door or floor first, for the layman, this is indeed a tangled problem, and some lack of experience in the decoration of the master Will be misleading, until all are fully decorated will find a series of problems, such as first install the door, after the floor was covered with the floor and found the opening and closing of the door is very inconvenient, if it is the first floor installed, the size of the door is also grasped not good. In fact, the solution to these problems is also very easy. We will know the answer after reading this article.

In addition to ceramic tiles outside my kitchen toilet. Whole room paved solid wood floor! Mom said: The door should be installed on the floor first, and the provincial floor scraped. I called for the sale. He said that he first laid the floor and reinstalled the door. I said the floor is easy to scratch. Did he say that it wasn't a single door? So I consult with the supervisor: first install the door or first floor?

Is it the first floor or first door? This topic is not new, many owners do not understand the decoration, and even businesses have their own arguments. Special reminder: If Ms. Zhao's living room is paved with bricks and bedroom floors, not the floor, then you don't need to think about it. Just choose to install the door first. If it is through the floor? Is it the first door or the first floor? In fact, the answer is not fixed, choose to install the floor or first install the door, you must first know their respective advantages and disadvantages.

The swarf that needs to be hit when the door is cut, and the styrofoam that is used to install the mouth. If you first install the floor, it will surely contaminate the floor.

2, easy to damage the floor

Many of the tools used to cut doors are metal tools, and they require a lot of space to work. If they are not careful, they will damage the floor.

3, baseboard can not close

If you do not install the door and install the floor first, the baseboard near the door will not close.

1. It is difficult to control the gap between the lower edge of the door and the floor (as shown in the figure below). In order to open/close the door, it is necessary to reserve a relatively large gap, but this is neither a visual nor a practical point of view (poor sound insulation). best choice.

Graphic explanation: first install the floor or first install the door _ decoration must see. Is it the first floor or first door? This topic is not new, many of the decoration owners understand that even businesses also have their own arguments.

Interior door flooring

Transparent Roller Shutter Door

Material: polycarbonate (PC bulletproof plastic)

Using aluminum profiles for door connection piece, two-layer structure , special design ,embedded into the door sheet. Simple and elegant, strong resistance to stress.

The base is made of aluminum alloy, special design, corrosion-resistant simple and aesthetic.

Mute track is made of aluminum alloy, dual-slot design, the mute material can be embedded into the slot, and creating a quiet environment.

Control system : 24V DC , mute operation, safe and reliable , durable and long life . In the case of obstacles ,doors rebound or stop automatically stop during opening and closing process.

Door opening and closing process, lighting and delaying three minutes automatically ; users can switch to manual option when power failure, uninterruptible power supply . Please contact with our technical department for particular requirements.

Transparent Roller Shutter Door,Transparent Curtain Roller Shutter Door,Commercial Transparent Roller Shutter Door,Polycarbonate Transparent Roller Shutter Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com