How to repair the electronic forklift scale failure?
Led Camp Light,Solar Led Camping Lights,Outdoor Solar Led Camp Bulb,Solar Camp Light Shenzhen You&My Electronic Technology Co., Ltd , https://www.szyoumy.com
There are more and more manufacturers of electronic forklift scales nowadays, but at the same time, there will be some minor problems in the course of use. The sturdy scales also need our meticulous care and the correct use of forklift scales. The so-called forklift scale is the pound placed on the ground. It is generally used to weigh relatively heavy items. For example, a full car is weighed up and then weighed on a forklift scale, and then the goods are unloaded and weighed on a forklift scale. Subtracting two numbers is the weight of the goods. But forklift scales will also fail one day. What should we do if the forklift scale fails? Today Xiaobian came to you to talk about the maintenance of forklift scale maintenance needs attention. I hope I can help you!
1, first outside, after the interior does not move to open the case, there is no initial judgment and exclusion like to spread out the stall is not a veteran approach. Looking to open the case to see where there is a broken line or obvious failure, it is purely luck, and even good luck can not be like this every time. About 50% of the faults are caused by the external environment or clean operation. If the shutdown time is long? Is there a large temperature difference between day and night? Is the location of the weighbridge instrument placed close to the elevator car? What equipment is there for use near a forklift scale? Is the computer setting correct? and many more.
2. Personally repeat the failure (if repeatable) does not rely on the dictation or paraphrase of the user or the third party.
Careful observation does not rely on the user's dictation, especially the third party's statement. In order to shirk their responsibility, some forklift scale operators would say that the instrument itself suddenly...had nothing to do with it, etc. These are understandable, and engineers must handle it properly.
3, the first power after the host, first attachment, after the host.
Should first check the power supply is stable, the load is too heavy, the scale of the forklift scale is good, the motor and other accessories are good and normal, whether the correct interface.
4, make full use of forklift scales on the surface of a variety of buttons, display screens and operation or maintenance procedures, etc., to do some exclusion, which requires extremely familiar with the structure (important steps).
5, understand the user's operating habits, the structure and level of the operator, the economic situation of the department will also be of great help to the forklift scale maintenance.
The professional forklift truck maintenance technology is also basically trained from the above-mentioned actual combat experience, so if you want to understand the maintenance situation of your forklift truck scale, you can learn from the above points.