The fundamental type of FAG double row angular touch ball bearings

Home>Bearing knowledge>The fundamental type of FAG double row angular touch ball bearing
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

The fundamental type of FAG double row angular touch ball bearings

Source: Bearing network time: 2014-05-25

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Models 32B and 33B; FAG double-row angular touch fan bearings do not have a fill groove; therefore, the axial load in both directions is the same. FAG bearings are filled with grease. These bearings are open; double-sided with seals. RSR) and double-sided with dust cover (. 2ZR) and other basic types. Because of the origin of production; such open-type imported bearings can be equipped with grooves for the seal ring or dust cover on the outer ring.
Types 32 and 33 FAG double row angular touch ball bearings have a fill groove on one side; therefore, care should be taken to ensure that the raceway does not fill the groove and accept the primary load on the side.
The 33DA double row angular contact ball bearing with double inner ring has a touch angle of 45°; therefore it is uniquely suited for accepting large axial loads in variable directions.

Recommend to friends comments close window

Bearing related knowledge
Pressure Relief and Disposal of Elastic Strut Thrust Bearings: Selection of "Sliding Bearing Oil" Selection and Analysis of the Fundamental Layout and Analysis of Deep Groove Ball Bearings
NTN Thrust Ball Bearing Oscillation and Temperature Selection and Application of TIMKEN Bearings


This article links to http://
Please indicate China Bearing Network http://

Previous:Production of rolling bearing - ferrule forming process Next:Inch tapered roller bearing 3984/20

T-Connectors are used in overhead power lines or at substations to divert electric current from the main  line of the busbar in a T shape. It is mainly divided into two types: bolt type and compression type. For wires with small cross sections, parallel groove clamps and plier compression oval splicers can also be used as T-connectors.

Specification
1) High quality of the T-Connector
2) Stable structure (Type TY)
3) Certificate: ISO9001
4) Prompt quote & Leadtime guarantee

T-Connector


T-Connector


T-Connector


If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.





T-Connector

Tly Type T- Connector,T-Connector For Single Conductor,Hydraulic Compression T-Connector,Compression T-Connector

Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be