UC3845B
UC3845B brand new original imported, long-term stock, the company only original factory, welcome to consult!
Brass knurled thread insert Made of material, good thermal conductivity and heat resistance.
Widely Used On the Injection molding for Tightly Fixing.
Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.
China leading manufacturers and suppliers of Hex Nut,Hexagonal Nut, and we are specialize in Stainless Steel Nuts,Hex Nut Bolt, etc.
Product photo 8-DIP
Standard packaging 2,000
Class integrated circuit (IC)
Home PMIC - Voltage Regulator - DC DC Switching Controller Series -
PWM type current mode output number 1
Frequency - up to 500kHz
Duty cycle 50%
Power supply voltage 8.2 V ~ 25 V
Buck without boost is retrace is reverse phase no multiplier without divider
Cuk no isolation is the working temperature 0 ° C ~ 70 ° C
Package / Case 8-DIP (0.300", 7.62mm)
package-
The reducer is generally used for low-speed and high-torque transmission equipment. The UC3845B uses the motor, internal combustion engine or other high-speed power to achieve the purpose of deceleration by gears with a small number of teeth on the input shaft of the reducer. The reducer will also have several pairs of identical principle gears to achieve the desired deceleration effect, the ratio of the number of teeth of the large and small gears is the transmission ratio.
The difference between the reducer is to reduce the motor (motor) speed through the mechanical transmission, and the inverter is to adjust the motor (motor) speed by changing the AC frequency. When the motor speed is reduced by the inverter, energy saving can be achieved. Domestic well-known inverter manufacturers have three crystals, Yingweiteng and so on. Edit this paragraph type classification reducer is a relatively precise machine, the purpose of using it is to reduce the speed and increase the torque. It has a wide variety of models, different models, and different types of uses. There are many types of reducers. The UC3845B can be divided into gear reducers, worm reducers and planetary gear reducers according to the drive type. It can be divided into single-stage and multi-stage reducers according to the number of transmission stages. According to the gear shape, it can be divided into cylindrical gears. Reducer, bevel gear reducer and cone-cylindrical gear reducer; according to the layout of the drive can be divided into expansion, split and coaxial reducer. The following are the classifications of commonly used reducers: Contact number 0755-82777362
Mr. Li QQ
Miss Huang QQ
Corporate website:
MSN: 
Brass hex nut,hex coupling nut,hex flange nut,hex thin nut,hex bolts and nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net