Use and maintenance of feed mill grease adding machine

The grease addition system is one of the important equipments that are indispensable in the compound feed mill. It is mainly used for the addition of liquid nutrients such as grease in the mixer. Good feed editors now introduce the operation and maintenance details of the feed mill grease adding machine: FDV China Feed Industry Information Network - based on feed, serving animal husbandry

Operation and use of feed mill grease adding machine FDV China Feed Industry Information Network - based on feed, serving animal husbandry

1. Before driving, you must carefully check the joints. There should be no looseness, check the oil pipes, etc., and there should be no oil leakage. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

2. Check if the steering of the two gear pumps is correct and whether the coupling rotation is flexible. There must be no abnormal sound such as jam or friction. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

3. When the oil storage tank is added with grease, adjust the upper and lower contact points of the electric contact pressure thermometer to 60-80 degrees (according to the viscosity of the grease), the storage tank is automatically heated to 60-80 degrees. At this time, the system can Add grease. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

4, grease addition procedures, control methods see electrical control instructions. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

5. In the fuel injection system, when a filter is used for 4 hours, another filter should be exchanged to clean the previous filter. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

Maintenance and maintenance of feed mill grease adding machine FDV China Feed Industry Information Network - based on feed, serving animal husbandry

1. After the shift, you should do the necessary checks (such as oil leakage in various parts) and cleaning work (such as liquid level gauge, dial, flow meter cleaning). FDV China Feed Industry Information Network - based on feed, serving animal husbandry

2. The coupling and gear pump should always ensure flexible movement. Check whether there is abnormal noise during operation. If it is found to be faulty, stop it in time. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

3. Regularly check the tightening degree of all fasteners and find that the looseness should be tightened in time. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

4. The fine filter should be cleaned no less than twice in each shift. The coarse filter should be cleaned no less than once. After cleaning, tighten the drain bolt or cover plate to tighten the bolt to prevent oil leakage. FDV China Feed Industry Information Network - based on feed, serving animal husbandry

5. When the work is completed, the grease in the oil storage tank should be placed in the oil pool from the return pipe. The oil storage tanks and pipelines shall be flushed and cleaned, and the sewage shall flow out from another passage of the return oil pipeline. FDV China Feed Industry Information Network - based on feed, serving animal husbandry