What are the common troubleshooting methods for high-speed ball?
PC plastic,full name Polycarbonate.
PC plastic is a kind of excellent comprehensive performance engineering plastics.It has excellent physical, mechanical, electrical, and thermal properties,so it's known as the "king of the transparent plastic'
Classification:
Anti - static PC SHEET, conductive PC SHEET,fireproof PC SHEET,PC fiber - resistant, PC GF SHEET, PC+ABS SHEET,anti-ultraviolet ray resistance PC, food grade PC, anti - chemical PC.
Advantages:
1,Light weight
2,Impact resistance
3,Excellent physical, mechanical, electrical and thermal properties
4,Ultraviolet resistance
Disadvantages:
Polycarbonate is not resistant to ultraviolet light, no resistance to alkali, resistance to hydrolysis stability is not high, is the main performance defect is sensitive to the gap, resistance to organic chemistry, scratch resistance is poorer, long-term exposure to ultraviolet light yellow, are vulnerable to the erosion of some organic solvents.
Applications:
1. Dust-free room spacer
2. Equipment shield and test fixtures;
3. Commercial Building Lighting;
4. Soundproof walls;
5. Greenhouse;
6. Components for medical and pharmaceutical devices;
7. Face shields;
8. Skylights, etc
Modified use:
The purpose of the modified PC Plastic is to toughen, improve the processing performance, reduce the residual deformation, and increase the flame retardancy, etc.
PC/ABS can improve bending modulus, heat resistance and plating performance.
PC/PET and PBT can improve drug resistance and solvent resistance.
PC/PMMA added plexiglass to enhance the appearance of pearlescent color.
PC/PA and HIPS can improve impact toughness and surface finish.
PC/HDPE can improve water resistance, aging resistance, weather resistance and LDPE.
The PC Plastic USES fiberglass or carbon fiber to enhance modification and improve mechanical strength.
The flame retardant grade PC Plastic can be made with bromine flame retardant and antimony trioxide.
Other and polysulfone, aromatic polycarbonate, polyvinyl formaldehyde, polypropylene, polystyrene can be modified to achieve the balance between economy and performance.
Combustion characteristics:
Combustion condition: easy, softening foaming
Flame status: small amount of black smoke
After the fire: out of the fire
Bouquet: no special taste
Specification: the thickness of PC Plastic sheet material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width cannot exceed 1200mm, the length is not limited.
Color: Black and clear, can also be made another color, and the color order is 500KG.
Modified varieties:PC Plastic can be added to the Glass Fiber, copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
PC Plastic Sheet,Esd PC Plastic Sheet,Fireproof PC Plastic Sheet,Abs Plastic Sheet Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com
Check whether the power supply is damaged: If the power supply is damaged, replace it to ensure that the power supply is not damaged. 
Check if the fuse is damaged: If it is damaged, replace it to ensure that the fuse is not damaged.
Check the power cord for poor contact: If it does not contact properly, reconnect the power cord or replace the power cord.
High-speed ball common troubleshooting method 2: there is a self-test power, there are images, can not control the check ball machine address code, baud rate setting is wrong: If wrong, please set the matching address code and baud rate.
Check whether the protocol settings are correct: If yes, set the corresponding protocol.
Check whether the RS485 control line is connected correctly: If there is any error, please connect according to the correct method.
High-speed ball common troubleshooting method 3: self-test can not be carried out, but there are images but with noise testing whether mechanical failure: Please correct the ball machine internal mechanical structure, such as camera tilt please correct.
The power may not be enough: Please replace the power supply that meets the requirements and try to place the switching power supply near the dome.
Troubleshooting Speed ​​Dome Common Troubleshooting Method 4: Unstable Image Replace the qualified video cable and check if the video cable is in poor contact.
The power may not be enough: Please replace the power supply that meets the requirements, and place the switching power supply near the dome.
High-speed ball common troubleshooting method five: the screen blur may focus on the manual state, control the dome or call any preset position, the dome can resume auto focus.
The transparent cover is dirty, and the transparent cover is removed. Common faults of the high-speed ball are eliminated. VI: Do not stop the ball or check the delay. Check whether the ball machine's matching resistor is added at the farthest point. If the ball machine far from the control is not added, please add the matching resistor. .
The power may not be enough: Please replace the power supply that meets the requirements, and place the switching power supply near the dome.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of 10-180mm is 600*1200 mm. PC Plastic sheet can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.and The diameter of the PC Plastic rod can be produced from 2mm to 250mm, the length is 1 meter, and it can be ordered to be more than 3 meters in length.
Add antistatic agent to the permanent plate, the volume resistance value of 10 to the 6 to 9 power.
Add flame retardant to the flame retardant board from UL 94v-0 to HB combustion grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.