Woodworking machine safety operation 10 items attention
Guangzhou Jointair Co., Ltd. , https://www.nbjointair.com
2) Work clothes should be worn before work, women workers must wear work hats, and gloves must not be worn during operation.
3) Fix the workpiece to clamp it. Loading and unloading, tool setting, measuring, shifting, tightening the mandrel, and cleaning the machine must all be performed after the spindle of the engraving machine has stopped.
4) It is forbidden to place measuring tools, workpieces and other sundries on the woodworker's workbench.
5) When the woodworking engraving machine is started, check whether the workpiece and the milling cutter are in the correct position.
6) When the woodworking engraving machine automatically moves the knife, the handle and the thread buckle should be disengaged; the worktable can not reach two extreme positions, and the limit block should be firmly fixed.
7) When the woodworking engraving machine is in operation, it is forbidden to use bare hands or to clean the machine tool with cotton yarn. A person cannot stand in the direction of the tangent of the milling cutter and must not blow chips with his mouth.
8) Before the woodworker's table and lift table are moved, the fixing screws must be loosened; when not moving, tighten the nuts.
9) Arbors, tie rods, chucks and tools should be installed and tightened before turning on the machine. Do not use woodworking engraving machine spindles to help with loading and unloading.
10) After the training is completed, the power should be turned off, the machine tool should be cleaned, and the engraving machine operating handle should be placed in the empty position. The worktable should be moved to the center.
Contact: Manager An (General Manager, Business Department)
Mobile Phone: 15614663873
Phone: 0531-84581858
Address: No.6, Xujia Industrial Park, Cuizhai Town, Jiyang County, Jinan City, Shandong Province, China