Second-hand housing renovation: safety first
Experience Talking Furniture Window Paint Cement Door Kitchen Cabinet Door Kitchen Door Toilet Waterproof Bathroom Door Bathroom Leakage Waterjet Focusing Tubes Waterjet Cutting Nozzle Waterjet Air Actuator Water Jet Head Spare Parts Spare Parts Replacement Piston Seal Kit For Waterjet Waterjet Cutting Head Parts Nozzle Collet WaterJet Nozzle Mixing Tube Check Valve Repair Spare Parts Spare Parts Sealing For Km Waterjet Valve Repair Kit KMT Waterjet Parts,Waterjet Air Cylinder,Hydraulic Press Cylinder,Waterjet Cutter Head Parts Foshan Hairan Machinery And equipment Co.,LTD , https://www.hairannozzle.com
Saint floor floor Whirl flooring is best to first disinfect the second-hand housing decoration before construction thoroughly disinfected. Use 1%-3% bleach water or spray with 3% peroxyacetic acid solution. Sprinkle doors and windows 1 hour after spilling.
A 24-hour to 48-hour water storage experiment should be conducted on the bathroom and kitchen to check the quality of the original waterproof construction. If there is a leakage, the waterproof treatment must be repeated.
Aging water pipes must replace the original water pipelines of second-hand housing. There are often many unreasonable layouts. During the renovation, the original waterway must be thoroughly inspected to see if it is rusted or aged. If the original pipeline uses a galvanized pipe that has been eliminated, it must be replaced by a copper pipe, an aluminum-plastic composite pipe or a PP-R pipe during construction.
The circuit is best to re-route the second-hand housing common circuit distribution is simple, aging wires, illegal wiring and other phenomena, so must be completely renovated in the renovation, re-wiring. If it is found that the original line is an aluminum wire, it must be replaced with a 2.5 mm square section of copper wire. For the installation of air-conditioning and other high-power appliances, a 4 mm square section of the line should be set up separately, and a PVC insulated conduit should be used when embedding.
Repair of the wall surface with cement mortar, cracks of second-hand housing walls, floors, ceilings, reform, it is best to ask professionals to carry out on-site inspection of the house, if there is obvious cracks, uneven, there are off and sanding phenomenon, we must carry out Repair processing. Including cement mortar repair base layer, cracks, holes and so on. After the repair, brush a primer and cover it, then re-apply the latex paint.
Changing the new doors and windows to leave old furniture doors and windows aging is a prominent problem in second-hand housing, but if the material is strong, and the style is not out of date, as long as re-painting can continue to use, but if the wood doors and windows from the skin, deformation, then explain the wood Changes in their own characteristics must be replaced.
For some of the old furniture that still has value in use, it can be properly retained because the harmful gas of the furniture evaporates for a long time. Now that the harmful gas from the old furniture has been volatilized, it is necessary to buy new furniture, which is neither environmental protection nor a waste of resources.
Links: Buying cabinets or custom comparison