Alternative TV installation method
When it comes to the installation of television, people usually have the impression of creating a TV background wall and embedding TV. However, for the small-sized apartment or owner's individual needs, many designers spent a lot of thought on TV installation methods, created many classic cases, not only greatly improved the flexibility, but also raised the overall decoration effect to a high degree . This week's reporter synthesizes the ideas of several designers and introduces you to several alternative TV installations to see if you can inspire your home improvement life. >>> Links: Expert strokes prevent wall cracks Bracket mounting method Design highlights: The TV is fixed on the wall by brackets, and can change the angle, giving the TV a little fashion. Applicable space: The space is small, and the closet, cloakroom occupy most of the space of the bedroom or other places do not have place to put the TV cabinet space. Effect: The direction and angle of the TV can be adjusted to meet the needs of watching TV in different locations. The space after TV storage is simple, clean and harmonious. The cooling and hygiene of the TV are very convenient. Although less decorative, it is the cheapest, simplest and most space-saving way of decorating. The reinforcement of the fixed bracket must be consulted with professionals to provide specific weights such as TV sets and brackets, which are calculated and tested by professionals to obtain concrete reinforcement solutions. If the bracket is not fixed firmly, it can not guarantee the installation effect of the TV, and it is also prone to other dangers. In addition, in daily use, the operation of the brackets such as push-pull needs to be careful, otherwise it is easy to squat and hit the TV. Renovation Difficulty: In principle, it is to be transformed onto a load-bearing wall, which needs to be reinforced when it is reformed in a cloakroom or other wall surface. Design flaws: The modified bracket needs a certain amount of load support, and the placement of external accessories such as set-top boxes, DVDs, and power cables is not easy to solve. >>>Link: The whole process of renovation of the wall of the construction site Live wall installation method Design highlights: The same TV can be seen in both spaces, making the conventional, non-replaceable decoration flexible. Applicable space: Two spaces that share a non-load-bearing wall but are independent of one another. Effect: One side of the living wall is equipped with a TV. The other side can be equipped with a decorative painting. During use, you can freely rotate the part of the living wall. When you want to decorate, rotate to the side of the mural. If you want to watch TV, rotate to the TV side and rotate. At a vertical angle, the atmosphere in both rooms became very active. During the renovation, a part of the non-load-bearing wall needs to be hollowed out as a space for TV. In this process, reinforcement treatment is required, and the requirements for the fixed parts such as the boom are also very strict, otherwise it is easy to be dangerous. The best way to reconstruct the connecting line is to use the hollow steel pipe to fix the bottom of the living wall wall. The living wall part is made of solid wood frame. The connection line is passed through the steel pipe and connected to the TV through the hollow live wall to create under the living wall. In a cabinet, external accessories such as DVDs and set-top boxes are placed in them, and they also pass through the steel pipe. Renovation Difficulty: Rebuilding the living wall is a difficult place. The connection of cable TV lines, power lines, etc. must also be considered clearly. Design flaws: Although saving the cost of a TV, the cost of rebuilding a living wall is even higher. The placement of external accessories such as set-top boxes, DVDs, and power cables is not easy to solve. When using, if you want to regulate and change TV programs in a room without DVDs and other accessories cabinets, you need to go to another room with accessories cabinets to operate. >>>Links: Analysis of Causes of Wall Cracking After Renovation Empty wall installation method Design highlights: Break the design imperfections that were used as backgrounds in the walls and use the entire wall as a background. Applicable space: The space to be demolished shall be a non-load-bearing wall, and shall be based on the premise that the demolition does not affect the life of another space. Effect of use: It is best to completely demolish the wall and then reshape a false wall. There are various styles of false walls, such as only the lower half, or only the upper half and the lower half supported by metal rods. Full of fashionable and modern, it enhances the linkage between two adjacent spaces. The “plasticity†of the empty wall is strong, and can be used for various decorations. Bead curtain partitions and glass partitions are all good choices. Avoid using TV cabinets, set-top boxes, DVDs, or other external devices as much as possible because too much decoration can be messy. Renovation difficulties: Need to knock down the entire non-load-bearing wall, and rebuild a fake wall to do decoration. Design flaws: The wall parts that need to be removed need to be carefully designed, otherwise the whole design will become “chicken ribsâ€. Furniture surrounding method Design highlights: Integrate the TV with the surrounding furniture, making the furniture and TV echo each other, creating a harmonious overall situation. Applicable space: bedroom, study room, etc. Use effect: This design saves the entire television cabinet the size of the three-dimensional space. It is recommended to select custom furniture and make it in accordance with the actual size of the space to ensure the overall combination of furniture and space. Consumers can also freely allocate the space inside the furniture according to their own preferences, and combine the effects of television and furniture to perform better. If you choose to purchase furniture, the gap between the top of the furniture and the ceiling is difficult to decorate, which not only affects the appearance but also easily accumulates dust. At the same time, it is not easy to match colors when purchasing; the furniture under the TV is not easy to match. Difficulties in renovation: The overall requirements for the surrounding furniture are high, and improper collocation is not easy to coordinate. Design flaws: The functional distinction is not clear. TV accessories, such as remote controls, DVD players, DVD discs, speakers, set-top boxes, etc., will occupy space that originally belonged to furniture. Furniture may also affect TV viewing when used. Hollow installation method Design highlights: Maintain the integrity and integrity of the wall, and at the same time protect the TV and save space. Applicable space: any light wall wall with a thick wall. Effect of use: The TV is placed in a hollow space sealed by glass, and the glass on the surface needs to be properly maintained. Once it gets dirty, it will affect the viewing effect of TV. The modified TV must be paired with an external speaker to listen to better sound effects. Direct use of the TV speakers will be affected due to space constraints. Difficulties in renovation: Leveling needs to be dealt with in a hollow place. Design flaws: The surface of the hollow TV slot can easily accumulate dust if it does not cover the glass. If it covers glass, it also requires careful handling of the glass and increases the difficulty of connecting the accessories. Wall Construction Space Furniture Decorating Glass TV Renovation Decoration Partition Glass Cabinet Glass Furniture Partition Cabinet Mural Cabinet Study Room Furniture Study Design Small-sized TV Background Wall Small-sized House Walls Fashion Small House Small Study Small Bedroom Cloakroom Size Bedroom TV Background Wall
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Bamboo Pendant Light,Gold Globe Pendant Light,Black Cone Pendant Light,Pendant Light Fixture Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com